Støvprøvekammer støvkammer

Testzentrum Baden Primus Engineering DST350

Primus Engineering
Type: DST 350
This testing facility was designed for conducting IP protection class tests “Dust” according to
e.g. DIN 40050 Part 9 and DIN EN 60529.
The test unit is intended for testing technical components under the influence
of dust and vacuum within the limits specified in the technical data.

Operation / HMI
Control panel with screen and buttons
Manual regulators
Stored test procedures
Integrated vacuum circuit with flow measurement

Technical data:
Total electrical power: Max. 5 KW
Connection voltage: 400V/50HZ 3-N/PE (16A EEC socket)
Dimensions: Width approx. 920 mm, Depth approx. 710 mm, Height approx. 1,770 mm
Test chamber dimensions: Width approx. 700 mm, Depth approx. 650 mm, Height approx. 770 mm
Volume: approx. 350 l
Gjdpfx Aaort U Nuotebu
Mass: approx. 200 kg
Vacuum: 0 to -100 mbar
Air flow rate: 0 to approx. 5 l/min
Operating climate range: Temperature: +12 °C to +30 °C
Humidity: 25% rel. H. to 75% rel. H.,
non-condensing

Protection class tests according to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1)
Dust test:
Dust-protected IP5X and IP5KX
Dust-tight IP6X and IP6KX
with and without vacuum

Condition: used
Scope of delivery: (see image)
(Subject to changes and errors in the technical data! All information is without guarantee.)
For further questions, we are happy to assist you by phone.

Annoncen blev oversat automatisk, og der kan forekomme nogle oversættelsesfejl.