Resonans test maskine

SincoTec Power Swingly 20 kN EXCITING MOT

SincoTec
Type: Exciting Mot
Resonance Test Stand POWER SWINGLY 20 kN
The POWER SWINGLY BigTable resonance test stand is designed as a two-mass oscillator.
It consists of an oscillating head, which is excited by an imbalance motor driven by a frequency-controlled asynchronous motor, located at the upper part of the machine and generating the dynamic amplitude.
The oscillating head is supported on preloaded compression coil springs at the upper crossbeam and is guided centrally.
The mid-load drive is located at the lower part of the machine and applies the static preload via a geared motor through a spindle drive.
The specimen chamber is positioned above the mounting table and is limited at the top by the adjustable crossbeam.
Control of the test stand is managed by the EXCITING MOT controller system.
All control electronics for the system are housed in an industrial PC cabinet.
The control cabinet is made of powder-coated sheet steel and meets protection class IP 50 according to EN 60529.

Technical Data:
General Test Stand Data:
Overall height test stand: 1840 to 2240 mm
Table height: 1030 mm
Test stand width: 800 mm
Test stand depth: 1500 mm
Specimen chamber height max.: 600 mm (without load cell)
Free column space: 550 mm
Maximum force amplitude: 10,000 N
Maximum total force: ±20,000 N
Maximum stroke: ±5 mm
Chsdpfxezii Awe Ahmeb
Test frequency: 30 to 110 Hz
Accuracy of measuring sensors: at least class 1 (per DIN EN 10002-3)
Test stand weight: approx. 1880 kg
Max. fixture weight: 150 kg

General Control Cabinet Data:
Overall height: 1900 mm
Tabletop height: 1080 mm
Width: 650 mm
Depth: 700 mm
Weight: 152 kg
Color: RAI 9006 (white aluminium), tabletop: midnight

Site Requirements:
Space requirement: 2.5 x 2.5 m
Required ceiling height: 2.8 m
Floor load capacity: 170 N/cm²
Power supply: 400 V / 50 Hz (clockwise rotating field)
Connection: CEE plug, 5-pole, 16 A
Fuse protection: 16 A

Electrical and Environmental Conditions
Network Conditions:
Voltage: 400 V three-phase with neutral and protective earth, clockwise rotating field
Voltage fluctuations: < ±10%
Short interruptions: < 20 ms
EMC Limits: Radio interference class A according to VDE0871
Frequency: 50 Hz ±1%
Protective earth: Grounding resistance < 0.3 Ω

Model: POWER SWINGLY MOT
Condition: used
Scope of delivery: (see picture)
(Technical data subject to changes and errors!)
Further questions can be answered for you by phone.

Annoncen er blevet oversat automatisk. Oversættelsesfejl kan forekomme.