Brugte Scoop til salg (153)

Betingelse: meget god (brugt), pure engineering Djdolddmzopfx Afujkh Type: pureGMC18 System for manual weighing processes Climatic chamber for highly sensitive weighing processes using ultra-microbalances. The weighing chamber is specially designed for the gravimetric determination of particulate emissions in exhaust gas analysis and complies with the regulatory requirements of environmental authorities. All necessary climatic control components are integrated. In combination with the particle filter, a contamination-free and precisely conditioned weighing and storage area for the filters is ensured. Features: Precise temperature and humidity control Weather station (p, t, h) for buoyancy correction Dew point mirror (optional) Vibration-damped granite for low-vibration mounting of an ultra-microbalance Ionization device to prevent static charge Airflow protection for shielding the weighing cell Touch panel for intuitive operation Ethernet interface for process data exchange Interior with sockets and grounding studs Advantages: Complies with regulatory requirements for particle weighing according to: ECE-R83 (light duty), ECE-R49 (heavy duty), EPA1065 (U.S. Environmental Protection Agency) Tested, ready-to-connect version Designation pureGMC18 Temperature 22°C ± 1 K Humidity 45% r.h. ± 3% Dimensions W/D/H 1,800/800/1,980 mm Cleanroom class 5 (ISO14644-1) Power supply 400V, 15A 50/60 Hz Weight: 650 kg Condition: used Scope of delivery: (see image) (Subject to technical changes and errors! All information is provided without guarantee.) If you have any further questions, we will gladly answer them by phone.

Betingelse: Defekt reservedelsbærer (brugt), Vickers Type: HVS 1000 The digital micro Vickers hardness tester HVS 1000 features a unique and precise design in its mechanical, optical, and lighting components, enabling it to deliver a clearer impression image and thus more accurate measurements. Main Purpose and Application Areas: 1. Iron and steel, non-ferrous metals, metal foils, hard alloys, sheet metal, microstructures 2. Carburized, nitrided, and decarburized layers, case-hardened surfaces, coatings, platings 3. Glass, wafers, ceramic materials Specifications: Model: HVS1000 Type: Digital Micro Hardness Tester Test Forces (N): 0.098 / 0.246 / 0.49 / 0.98 / 1.96 / 2.94 / 4.90 / 9.80 Test Forces (kgf): 10 / 25 / 50 / 100 / 200 / 300 / 500 / 1000 Load Control: Automatic loading and release Turret for objective/indenter: Manual Dwell Time (s): 0~60 Microscope Magnification: 400x for measurement (Objective 40x, Eyepiece 10x) 100x for observation (Objective 10x, Eyepiece 10x) Micrometer Resolution (μm): 0.01 Test Range: 5 HV~3000 HV XY Test Table Dimensions: 100 x 100 mm XY Test Table Travel: 25 x 25 mm Max. Specimen Height: 120 mm Max. Specimen Width: 110 mm Hardness Conversion: HK, HRA, HRB, HRC, HRD, HR15N, HR30N, HR45N, HR15T, HR30T, HR45T, HV, HBW Output: Built-in printer, RS232 interface Dkodjrr Sqpspfx Afueh Power Supply: 220V, 60/50Hz Dimensions (mm): 441 x 270 x 480 Net Weight (kg): 35 Condition: used Scope of delivery: (see image) (Technical specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Betingelse: god (brugt), Stäubli Model: RX 60B EX Robot: Nominal payload: 2.5 kg Weight: 44 kg Model: RX 60B EX Control unit: 3x400V – 50/60 Hz – 3000 VA Weight: 170 kg Model: CS8 EX RX60B EX Dodpsbwz Icsfx Afuokh The robot is offered without functional guarantee! Condition: used Scope of delivery: (See picture) (Subject to alterations and errors in the technical data; specifications may change!) For any further questions, please feel free to contact us by phone.

Betingelse: god (brugt), Vötsch Model: VCS 7130-15 Vötsch Climate Test Chamber, Water-Cooled Specifications for Temperature Tests: Temperature range: -70°C to 180°C Temporal temperature deviation at the center of the usable space: ±0.3 to ±0.8 K Spatial temperature deviation: ±0.5 to ±2 K Temperature gradient: 1 to 4 K Rate of temperature change: Heating: 16 K/min Cooling: 14.5 K/min Specifications for Climate Tests: Temperature range: +10°C to +95°C Humidity range: 10 to 98 % RH Temporal temperature deviation at the center of the usable space: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1 K Temperature gradient: 1 to 2 K Humidity fluctuation in the center of the usable space: ±1 to ±3 % RH Heat compensation: max. 8000 W Housing dimensions: External dimensions with hinges and door lock: Height: 1995 mm, Width: 1680 mm, Depth: 1855 mm External dimensions without hinges and door lock: Height: 1995 mm, Width: 1300 mm, Depth: 1855 mm Internal dimensions: Height: 950 mm, Width: 1100 mm, Depth: 950 mm Test chamber volume: approx. 1300 liters Feedthroughs: The chamber is equipped with feedthroughs on the right and left sides, allowing cables and test equipment to be routed into the test chamber. 1 x R1 NW 125 mm 1 x R1 NW 140 mm 1 x L1 NW 50 mm Test chamber lighting: Halogen bulb 24 V, 50 W 3/N/PE AC 400 V ±10% 50 Hz Rated power: 44.0 kW Rated current: 63.0 A Site fuse: 100 A slow-blow Max. heat output to the environment: 2.2 kW Permissible test specimen weight: Total load of shelf supports: 100 kg Test chamber floor: 150 kg, Insert shelf: 50 kg Refrigerant: R 404A / R 23 Weight: 1900 kg Dedpswvgwbsfx Afuekh Important safety information for buyers: The following actions are performed on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Technical specifications subject to change and error!) If you have further questions, we will be happy to answer them by phone.

Betingelse: meget god (brugt), Atlas Type: SC 350 MHG Atlas-Solar Climate Test Chamber, Air-Cooled For sale is an ATLAS SC-340 MHG SolarClimatic Test Chamber (climate chamber with sun simulation via MHG lamp). This unit is suitable for performing standardized weathering and aging tests under combined exposure to radiation, temperature, and climate. Features & Highlights: - Precise temperature and humidity control - Integrated humidification system with water reservoir - Cooling via water or air system (optional) - Feedthroughs for measurement cables provided - Operation via control panel or interfaces (RS232, etc.) - Stable test chamber floor, loadable up to 60 kg (optionally reinforced up to 150 kg) General Data: - Model: SC 340 MHG - Test chamber volume: approx. 335 liters - Cabinet weight: approx. 500 kg - Irradiation unit weight: approx. 65 kg Technical Data: - Test chamber volume: 340 l (internal dimensions: 580 × 765 × 750 mm) - External dimensions (W×D×H): 865 × 1,595 × 2,180 mm - Radiation source: 1 × 1,200 W MHG lamp - Irradiance: 800–1,200 W/m² Dsdpoxbd Rasfx Afuskh - Illuminated area: approx. 3,300 cm² - Weathering: spectrum 300–3,000 nm, standardized tests in accordance with DIN 75220, IEC 60068-2-5, MIL-STD-810F - Temperature range with irradiation: –20 °C to +100 °C (±1 K) - Temperature range without irradiation: –30 °C to +100 °C (±0.1–0.5 K) - Heating/cooling rates: 3.0 K/min (heating), 2.5 K/min (cooling without irradiation) - Sound level: approx. 58 dB(A) at 1 m distance - Power supply: 400 V, 3/N/PE, 50 Hz - Power consumption: max. 6.2 kW, 16 A Refrigerant: R-404A Weight: approx. 565 kg Safety information for buyers! The following points are checked and performed on all chambers offered by us before sale: 1. Functional inspection and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak check with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) Further questions can be answered by phone.

Betingelse: meget god (brugt), Atlas Type: CI3000 F Atlas CI3000 Xenon Fade-Ometer The Ci3000+ Weather-Ometer and the Fade-Ometer, with their advanced digital control systems, represent monumental achievements in the application of digital and optical technologies in user-friendly laboratory weathering instruments. The 3000 Series is approved by numerous OEMs in the textile, paint and coatings, as well as the plastics industries as an exclusive platform for precise, reproducible, and repeatable results for lifetime prediction. Features: - Type: Climate - Test method: Sunlight simulation - Light source: Xenon arc lamp Dkedpfxjucd Rbs Afueh Applications: - Additives and Dyes - Adhesives and Sealants - Architecture and Construction - Automotive Industry - Food and Beverages - Graphics - Packaging - Paints and Coatings - Photovoltaics - Plastics - Textiles - Wind and Solar - Consumer Electronics - Compressed Air Supply The CI3000's humidification system operates with a compressed air ultrasonic spray nozzle. Prior to entering the unit, the compressed air must pass through a water/oil separator. The small air regulator in the CI3000 contains a secondary water-oil filter and a 5-micron particulate filter. Ensure that a dedicated oil-water separator is installed and do not rely solely on the air regulator's filter as it is intended only as an auxiliary device. Compressed Air Specifications: Pressure: 80–100 PSI (552–689 kPa) Flow rate: 4 CFM (0.11 m³/min) Dimensions: Overall dimensions of the CI3000: 37.5” wide x 29” deep x 72” high (95 cm wide x 73 cm deep x 183 cm high) Required footprint: 41.5” wide x 80” deep (105 cm wide x 203 cm deep) Overall weight: 404 kg Voltage: 380-220 V, 38 A, 50 Hz 3/N/PE, 8 kW 404 kg Condition: used Scope of delivery: (see image) (Specifications and information are subject to change and errors are excepted!) For further questions, we are happy to assist you by phone.

Betingelse: god (brugt), Espec Model: TSD-100 100 liters usable chamber volume for larger test specimens up to 30 kg. Complies with all common international standards. Water-cooled Temperature range (hot chamber): +60 °C to +200 °C Temperature range (cold chamber): 0 °C to -70 °C Test chamber dimensions: 710 x 345 x 410 mm (W x H x D) External dimensions: 1100 x 1885 x 1965 mm (W x H x D) Water-cooled refrigeration unit Programmable control via touch panel Automatic defrost function Overtemperature protection Dkedeugl H Sjpfx Afueh Operating hours counter Mobile version on castors 2 stainless steel specimen baskets Cable entry port Ø 100 mm Refrigerants: R404A 1kg, R23 Power supply: 400V 3Ph 50Hz Max. current consumption: 32A Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and errors excepted!) We are happy to answer further questions by phone.

Betingelse: meget god (brugt), Perkin Elmer Type: Optima 7300 V Spectrometer Perkin Elmer ICP-OES Optima 7300V with chiller and S10 autosampler The optical system of the Optima 7300 V allows for simultaneous measurement and coverage of the entire wavelength range (UV and visible). More than 73 elements can be measured within seconds, ensuring exceptional sample throughput, and all raw spectral data are stored with full reprocessing capabilities. This allows sample results to be evaluated under different processing conditions, reducing the need for retesting and saving both time and costs. The Optima 7300 V was specifically designed to meet the special challenges of analyzing oil samples and special metals in laboratories and offers the following features: - Classic vertical burner configuration with radial viewing - User-friendly sample introduction system - Proven high-performance optical system - Robust solid-state generator - Two models available: Oil version for oil analysis and HF version for geochemical and high solid-content analysis Technical Data: Wavelength range ultraviolet: 165 to 403 nm VIS detector for visible spectrum: 404 to 782 nm Spectral background measurement possible during the analyte signal Solid-state 40 MHz signal generator Dimensions: 150 x 76 x 89 cm (W x H x D) Mains connection: 200-240 V, 20 A supply, single-phase, 50/60 Hz Maximum power: 2800 VA Supply current: 15 A Recirculating chiller: PolyScience Recirculator N0772025 Mains connection: 200–240 V, 50 Hz Weight: 200 kg Dkjdpfx Ajv Hzpuefueh Condition: used Scope of delivery: (see picture) (Specifications and data subject to change and error!) For further questions, feel free to contact us by phone.

Betingelse: brugt, Trumpf Type: TruDisk 4002 / W20.HL29 Laser beam source Trumpf TruDisk4002 with KLH chiller The Trumpf TruDisk 4002 laser beam source is an industrial disk laser from TRUMPF, known for its high power, beam quality, and efficiency. It is widely used for welding, cutting, and other material processing applications. Maintenance has been carried out regularly. The unit consists of the laser source with matching chiller, but without optics and fiber optic cable. Djdewh Rnzjpfx Afuekh Technical data: - Laser power: 4,000 watts (4 kW) (minimum 80 W) - Wavelength: ~1030 nm (infrared range) (Yb:YAG) - Beam quality (BPP): typically ≤ 8 mm·mrad - Fiber connection: TruDisk lasers usually have multiple fiber connectors - Cooling: Water-cooled – via a KLH chiller - Dimensions: 1.0 x 2.0 x H1.6 m (laser) + 1.0 x 1.5 x 1.8 m (chiller) - 380 V -10 % ... 460 V +10 %, 3AC + PE - 23 kW / 25 kVA - 34 A / 400 V 50 ... 60 Hz KLH chiller: The KLH chiller is an industrial liquid chiller designed for heat dissipation from high-power laser systems such as the TruDisk 4002. Typical features: - Water-to-water cooling - Precise temperature control (typically 20–25 °C) - Refrigerant: R 404A - Can be controlled via TRUMPF interface - Essential for compliance with laser specifications - Device type W20.HL29 - Weight: 850 kg (laser) + approx. 550 kg (chiller) Condition: used Scope of delivery: (See image) (Specifications and details are subject to change and error!) If you have further questions, we are happy to answer them by phone.

Betingelse: meget god (brugt), CTS Type: TW -60/9 Water-Cooled Temperature Test Chamber CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: lower temperature limit -60°C 9 stands for: 9 m³ test chamber volume Technical Specifications: Refrigeration Unit: Water-cooled, low-noise, semi-hermetic Stepless power adjustment via electronic monitoring and control system Environmentally friendly refrigerant R23 / R404A Control System: 32-bit controller LCD control panel Digital display of target and actual values Numeric input of setpoints Clear text error messages RS 232 interface Free switching channels for user-side test item control Technical Performance Data: Temperature Testing: Temperature range: -60 °C to +100 °C Temperature deviation: ± 0.1 to 0.5 K (over time) Temperature change rate (measured in supply air with test items and radiant heat): Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C Test specimen: 420 kg solar modules, 100% following Radiant heat: 3000 watts continuous Technical data are based on ambient temperature +25°C, nominal voltage 400 V, without test item, without radiant heat, and without additional equipment. Dkodpfx Afevb Hanoujh Dimensions: Test volume: 9 m³ External dimensions: Width approx. 4140 mm, Depth 2680 mm, Height 3000 mm Internal test chamber dimensions: Width approx. 1600 mm, Depth 2400 mm, Height 2200 mm Operating Data: Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz Rated power: 48.9 kW, Rated current: 74.9 A Protection class: IP 54 Cooling water connections: Supply/return R1 ¼", female thread Condensate drain non-pressurized R1" female thread Weight: approx. 5609 kg Condition: Used Scope of delivery: (See picture) (Specifications and technical data subject to change and error!) We are happy to answer further questions by phone.

Betingelse: brugt, CTS Type: TS -70/600-13 Water-cooled temperature test chamber Model series: TS -70/600-13 Control System: - 32-bit controller - LCD control panel - Digital display of target and actual values - Numeric input of setpoints - Plain text error messages - RS 232 interface - Free switching channels for external test item control Test chamber volume: 600 liters Internal dimensions: height approx. 730 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: height approx. 2250 mm, width approx. 1300 mm, depth approx. 2475 mm Temperature range: -70 to +180°C Heating rate: 13 K/min from -40°C to +120°C Cooling rate: 13 K/min from 120°C to -40°C Temperature deviation: ± 0.1 K over time, ± 0.5 K spatially Electrical connection: 400/3P/N/PE Dkjdsvcyawjpfx Afuoh Rated power: approx. 27.8 kW Rated current: approx. 44.1 A Compressors: 4TC-8.2Y/4PC-10.2Y Refrigerants: R-404A / R-23 Weight: 1350 kg For your safety as a buyer, please note: The following steps are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented trial run Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) If you have further questions, we are happy to answer them by phone.

Betingelse: ukontrolleret (brugt), DÜRR Type: DÜRR 1K-adhesive application unit Dürr 1K adhesive application unit with drum pump, metering unit, and heated hose (approx. 5m). Dkedpfx Afjrdyb Asuoh Technical machine description: Condition of the unit Drum pump, feed hoses, metering unit etc. are contaminated with old adhesive and must be cleaned or replaced. The unit has approx. 20 operating hours. Machine was used in a research facility. Year of manufacture: 2017 Air inlet pressure max. 6 bar Dimensions: approx. 1.5 x 1 x 1.5 meters 1 adhesive controller DÜRR (110017040) 1 single drum pump (110014004) Weight: approx. 300 kg Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data and specifications are reserved!) If you have further questions, we are happy to answer them by phone.

Produktionsår: 2021, Betingelse: meget god (brugt), Zwick / Roell Model: Mflow Application Area: With increasing testing volume, the demand for a higher degree of automation also rises (compared to the Cflow). The Mflow is a modular, expandable device that allows you to determine the melt mass-flow rate (MFR) and melt volume-flow rate (MVR). The base version of the Mflow melt flow tester is designed for MFR testing according to Method A and can be extended for MVR testing according to Method B. Testing according to the following standards is possible: - Methods A and B according to ISO 1133 - Methods A, B, and C according to ASTM D 1238 - ASTM D 3364 - JIS K 7210 Optionally, the Mflow can be equipped, for example, with pneumatic weight lifting (with or without cleaning function) or weight stacking. The Mflow can be operated as a stand-alone device via a modern touch display or in conjunction with ZwickRoell testing software on a PC. Technical Data: Test load: 0.325 – 21.6 kg (depending on additional weights used) Compressed air (only required for optional pneumatic weight lifting): 6 – 10 bar, oiled, dry Test temperature: +50 °C – +450 °C Display: capacitive touch display Temperature display resolution: < 0.1 K Temperature accuracy: < 0.3 K Number of storable parameter sets: > 100 Dimensions: Height: 510 mm Width: 360 mm Depth: 419 mm Weight: Approx. 43 kg Time Measurement: Error limit Method A: ± 0.02 s Error limit Method B: ± 0.01 s Djdpotq Em Tefx Afuskh Displacement Measurement (Method B): Error limit: ± 0.02 mm (ISO 1133) Resolution: < 0.005 mm PC connection: Multi-unit operation possible (up to 6 devices per PC) Power supply: 220 – 240 V / 50–60 Hz Power consumption: 2.6 A Software version: V4.2 Year of manufacture: 2021 Condition: used Scope of delivery: (see picture) (Changes and errors in technical data and specifications reserved!)

Betingelse: meget god (brugt), LDS Type: V895-440 HBT900C with Amplifier SPA50K Technical Data: Armature Dimensions: 440 mm Sine Force Vector: 55.6 kN (peak) Random Force Vector: 55.6 kN (rms) Half Sine Force Vector: 166.8 kN (peak) Frequency Range: 0 to 2100 Hz Maximum Sine Acceleration: 981 m/s² Maximum Random Acceleration: 490 m/s² Maximum Velocity: 1.6 m/s Displacement: ± 63.5 mm Moving Mass: 55 kg Maximum Load: 700 kg Amplifier Dimensions: Dkjdpeuy H I Tjfx Afush W x H x D (mm): 537 mm x 1905 mm x 895 mm Weight: 622 kg Slip Table: Working Surface: 900 mm x 900 mm Plate Thickness: 50 mm Plate Weight: 80.4 kg Maximum Load: 7250 kg Usable Frequency Range: 5-2000 Hz Condition: used Total Weight (Table + Shaker): approx. 7000 kg Shaker + Table Dimensions: L x H x W approx. 2700 x 1500 x 1800 mm Scope of Delivery: (See pictures) (Changes and errors in the technical data, specifications are reserved!) If you have further questions, we will be happy to answer them by phone.

Produktionsår: 2011, Betingelse: meget god (brugt), CTS Type: T-30/950 Ex/I CTS Temperature Test Chamber – Explosion-Proof Control: 32-bit controller LCD control panel Digital display of setpoint and actual values Numerical input for setpoints Error messages in plain text RS 232 interface Dksdpfx Asihb Amsfueh Free switching channels for external test object control Temperature Testing: Temperature range: -30°C to +80°C Temperature deviation: ±0.3 K over time Temperature change rate: Heating: 2 K/min Cooling: 1.5 K/min down to -10°C Heat radiation: approx. 1000 W at +20°C, approx. 200 W at -25°C Nitrogen inertization with residual oxygen monitoring With nitrogen inertization, the test chamber is initially purged with a large volume of N2 until the oxygen content is less than 3%. Afterwards, it switches to a base flow (approx. 10% of the large volume). The nitrogen flow at the base quantity is measured by a flow meter, displayed, and monitored by a limit switch. O2 monitoring continuously extracts gas from the test chamber via a flame arrestor and passes it through an O2 sensor that monitors the residual oxygen content. The gas is then returned to the test chamber via a second flame arrestor. The extraction pump is monitored by a flow meter. For further details, refer to the Dräger operating manual attached. The gas installation is currently out of service! Technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test item, without heat radiation, and without additional equipment. Dimensions: Test volume: 950 liters Test chamber internal dimensions: height approx. 700 mm / width approx. 900 mm / depth approx. 1500 mm External dimensions: height approx. 2400 mm / width approx. 1270 mm / depth approx. 3125 mm Operating Data: Electrical connection: 400V +6/-10%, 3/N, 50 Hz Nominal power: 21.6 kW Nominal current: 36.5 A Protection class: IP 54 Condensate drain: non-pressurized, R 1/2" female thread Sound pressure level: < 62 dB(A) (measured according to DIN EN ISO 3744, at a distance of 1m from the front) Weight: approx. 1500 kg, control cabinet approx. 300 kg External refrigeration unit Refrigerant: R404A / R23 For your safety as a buyer, please note the following information! The following items are carried out in advance on all chambers we offer: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak check with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to modifications and errors in technical data and specifications!) We are happy to answer further questions by phone.

Betingelse: meget god (brugt), Weiss Model: WK3-340/70 Weiss Climate Test Chamber, Air-Cooled Control unit: "Touch Panel" All control and operating commands can be executed by simply touching the function symbols on the touch panel control unit. Leveling Feet To compensate for uneven floors and ensure sufficient ventilation of the machine compartment, the test chamber is equipped with adjustable feet. Feedthroughs The test chamber is equipped with feedthroughs on both the right and left sides. These allow measurement cables and test devices to be routed into the test chamber. Standard feedthroughs installed: R1: nominal width 125 mm L1: nominal width 85 mm Volume: 335 liters Test chamber dimensions: Internal dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Temperature test specifications: Minimum temperature: –72°C Maximum temperature: +180°C Temperature deviation, over time: ± 0.1 to ± 0.5 K Temperature uniformity, spatial: ± 0.5 to ± 1.5 K Temperature change rate, cooling: 3 K/min Temperature change rate, heating: 3 K/min Dkodpfxov Sr Hzs Afush Climatic test specifications: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 10 to 98% RH Temperature deviation, over time: ± 0.1 to ± 0.3 K Temperature uniformity, spatial: ± 0.5 to ± 1 K Humidity deviation, over time: ± 1 to ± 3% RH Operating data: Test chamber illumination: Halogen bulb 2 x 24V, 50W Nominal voltage: 3/N/PE AC 400V ±10% 50Hz Nominal current: 16 A Nominal power: 4.9 kW Customer-provided circuit breaker: 16 A slow-blow Refrigerant: R-452A/R23 Weight: Approx. 585 kg For your safety as a buyer, please note the following information: The following procedures are performed in advance on our offered chambers: 1. Functional inspection and replacement of necessary components 2. If required, a new refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Betingelse: meget god (brugt), Keyence Dodpfxjwc Sxde Afuekh Model: VR-5200 Type: Measurement Head Light Sources Observation Light Source: LED ring light (red, blue, green) Measurement Light Source: White LED Control Unit: VR-5000 Observation and Measurement Range Macro Mode Magnification (on a 15-inch monitor) 12×: Horizontal 24.0 mm Vertical 18.0 mm Magnification (on a 15-inch monitor) 25×: Horizontal 12.0 mm Vertical 9.0 mm Magnification (on a 15-inch monitor) 38×: Horizontal 8.0 mm Vertical 6.0 mm Magnification (on a 15-inch monitor) 50×: Horizontal 6.0 mm Vertical 4.5 mm Micro Mode Magnification (on a 15-inch monitor) 40×: Horizontal 7.6 mm Vertical 5.7 mm Magnification (on a 15-inch monitor) 80×: Horizontal 3.8 mm Vertical 2.9 mm Magnification (on a 15-inch monitor) 120×: Horizontal 2.5 mm Vertical 1.9 mm Magnification (on a 15-inch monitor) 160×: Horizontal 1.9 mm Vertical 1.4 mm Zoom 1× to 4× Height Measurement Measurement Resolution: 0.1 µm Height Measurement Range Without Image Stitching in Z Macro Mode: 10 mm Micro Mode: 1 mm With Image Stitching in Z Macro Mode: 50 mm Micro Mode: 30 mm Repeatability (σ) Without Image Stitching in Z 0.4 µm With Image Stitching in Z 1.0 µm Measurement Accuracy Without Image Stitching in Z ±2.5 µm With Image Stitching in Z ±4.0 µm Width Measurement Repeatability (σ) Macro Mode: 1 µm Micro Mode: 0.5 µm Measurement Accuracy Macro Mode: ±5 µm Micro Mode: ±2 µm Image Stitching Fully automatic measurement (automatic XY control + automatic Z focus), automatic assignment, automatic range setting Measurable XY Area 206 x 104 mm Object Table (Stage) XY Travel 184 × 88 mm (motorized) Z Travel 73 mm (motorized) Load Capacity 4.5 kg Working Distance 75 mm Imaging Element 4 Megapixel CMOS, B/W Transmitter Lens Double Telecentric Lens x 2 Receiver Lens Double Telecentric Lens Data Processing Dedicated PC according to KEYENCE specifications (OS: Windows 11 Pro) Power Supply Voltage 100 to 240 V AC, 50/60 Hz Power Consumption Max. 200 VA Environmental Resistances Ambient Temperature 15 to 30 °C Relative Humidity 20 to 80% RH (non-condensing) Weight approx. 28 kg (net weight of measurement unit approx. 11 kg) Distance Extension Object Table Viewing Software VR-5000 Version 3.3.5.75 Image Stitching Module VR-H3J Creates a single large image from a series of images captured by the viewing software. You see color images. Analysis Extension Module VR-H3CA Expands the functions of the analysis software. Enables measurement comparison and 3D CAD measurement comparison. Condition: used Scope of delivery: (as shown) (Subject to changes and errors in technical data, all data are subject to confirmation!) For further questions, please feel free to contact us by phone.

Betingelse: meget god (brugt), Type: SWT 200/400-S White Spray and Splash Water Test Chamber Used for testing the ingress of water into enclosures. When combined with a timer, the test cycle can be automated with an adjustable test duration from 3 seconds up to 30 hours. Conforms to DIN VDE 0470 T1 and EN 60529 for testing according to protection classes IPX3 and IPX4. The integrated recirculation system minimizes water consumption. Features: - Glass door with wiper - Pneumatic drive for the oscillating tube - Adjustable oscillation angle - Interchangeable oscillating tubes - Rotatable and exchangeable nozzle holders - Adjustable and measurable water flow rate - Programmable test duration Mechanical Load Data: Dedpsxg Hrkjfx Afuekh Max. load with test item (evenly distributed): Permissible test item weight for carrier (total): 25 kg Spray radius: 200 mm / 400 mm Data for IP Protection Rating Tests: Oscillation speed: approx. 60°/s Oscillation angle IPX3: approx. ± 60° Oscillation angle IPX4: approx. ± 180° -10° Dimensions: External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1,900 mm External (D x W x H): approx. 1000 x 1000 x 1,900 mm Internal (D x W x H): 400 x 650 x 750 mm Operating Data: Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 1.5 kW Rated current: 6.0 A Weight: 375 kg Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see image) (Specifications subject to change and error!) We are happy to answer further questions for you by phone.

Betingelse: brugt, SincoTec Type: Exciting Mot Resonance Test Stand POWER SWINGLY 20 kN The POWER SWINGLY BigTable resonance test stand is designed as a two-mass oscillator. It consists of an oscillating head, which is excited by an imbalance motor driven by a frequency-controlled asynchronous motor, located at the upper part of the machine and generating the dynamic amplitude. The oscillating head is supported on preloaded compression coil springs at the upper crossbeam and is guided centrally. The mid-load drive is located at the lower part of the machine and applies the static preload via a geared motor through a spindle drive. The specimen chamber is positioned above the mounting table and is limited at the top by the adjustable crossbeam. Control of the test stand is managed by the EXCITING MOT controller system. All control electronics for the system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated sheet steel and meets protection class IP 50 according to EN 60529. Technical Data: General Test Stand Data: Overall height test stand: 1840 to 2240 mm Table height: 1030 mm Test stand width: 800 mm Test stand depth: 1500 mm Specimen chamber height max.: 600 mm (without load cell) Free column space: 550 mm Maximum force amplitude: 10,000 N Maximum total force: ±20,000 N Maximum stroke: ±5 mm Test frequency: 30 to 110 Hz Accuracy of measuring sensors: at least class 1 (per DIN EN 10002-3) Test stand weight: approx. 1880 kg Max. fixture weight: 150 kg General Control Cabinet Data: Overall height: 1900 mm Tabletop height: 1080 mm Width: 650 mm Depth: 700 mm Dkodpfx Afsvx Su Soueh Weight: 152 kg Color: RAI 9006 (white aluminium), tabletop: midnight Site Requirements: Space requirement: 2.5 x 2.5 m Required ceiling height: 2.8 m Floor load capacity: 170 N/cm² Power supply: 400 V / 50 Hz (clockwise rotating field) Connection: CEE plug, 5-pole, 16 A Fuse protection: 16 A Electrical and Environmental Conditions Network Conditions: Voltage: 400 V three-phase with neutral and protective earth, clockwise rotating field Voltage fluctuations: < ±10% Short interruptions: < 20 ms EMC Limits: Radio interference class A according to VDE0871 Frequency: 50 Hz ±1% Protective earth: Grounding resistance < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Scope of delivery: (see picture) (Technical data subject to changes and errors!) Further questions can be answered for you by phone.

Betingelse: meget god (brugt), Stäubli Type: Robot TX90L / Controller CS8C Six-axis robot with controller The high-performance robots of the TX90 series for medium payloads offer maximum flexibility for a wide range of applications due to their compact and slim design. Thanks to three mounting options—floor, wall, and ceiling—these six-axis robots are easy to integrate. The fully enclosed design (IP 65) allows operation in cleanrooms or under harsh environmental conditions. Features - Fully enclosed construction with internal supply lines - Rigid structure - Multiple mounting options - Patented Stäubli JCM gear modules - Large reach Advantages - Perfect protection of components. - Standard version in cleanroom class ISO 5. - Easy to clean. - Excellent dynamic path performance - High flexibility - Precision, dynamics, and speed with reduced maintenance - Optimal use of the workspace Technical data TYPE: TX90L Degrees of freedom: 6 Nominal payload: 6 kg Maximum payload: 15 kg Reach: 1200 mm Repeatability: ±0.035 mm Protection class (wrist): IP65 (IP67) Mounting options: Floor / Wall / Ceiling Controller: Stäubli CS8 / CS8C Features - Ethernet, fieldbus, digital I/Os, serial interfaces - Easy integration, 19-inch rack version, protection class IP20 - All connections on the front panel - Proven digital technology Advantages - Open architecture - Compact Dsdjvx Tbtepfx Afuskh - Good accessibility - Reliable Technical data: Type: CS8C Dimensions (H x W x D): 331 x 445 x 455 mm 481 x 445 x 455 mm Protection class: IP20 (IP54 optional) RAM: 64 MB (min.) Storage: 128 MB (min.) flash disk and USB port System/programming language: VAL 3 (multi-tasking interpreter language), PLC language IEC 61131-3 Communication: Serial interface RS232/422, Ethernet, ModBus/TCP server Type: Robot TX90L / Controller CS8C Condition: used Scope of delivery: (See picture) (Modifications and errors in the technical data and specifications excepted!) If you have further questions, feel free to call us.

Betingelse: god (brugt), Weiss Model: WK3-600/70 Climate Test Chamber, Water-Cooled Specifications for Temperature Testing: Temperature Range: -70°C to +180°C Temperature Change Rate: Heating: 4.0 K/min Cooling: 2.5 K/min Dkodpfx Ajw Inmmefush Temperature Deviation: Temporal: ±0.1 to ±0.5 K Spatial: ±0.5 to ±1.5 K Heat Compensation: max. 2500 W Specifications for Climate Testing: Temperature Range: +10°C to +95°C Dew Point Temperature Range: -3°C to +94°C Humidity Range: 10 to 98 % RH Temperature Deviation (temporal): ±0.1 to ±0.3 K Temperature Deviation (spatial): ±0.5 to ±1 K Humidity Deviation (temporal): ±1 to ±3 % RH Temperature Uniformity: Spatial: ±0.5 to ±1.0 K Heat Compensation: max. 500 W Test Chamber Volume: 600 liters Internal Dimensions: Height 950 mm x Width 800 mm x Depth 800 mm External Dimensions: Height 1998 mm x Width 1000 mm x Depth 1745 mm Operational Data: Rated Voltage: 3/N/PE AC 400V ±10% 50Hz Rated Power: 9.1 kW Rated Current: 19.0 A Refrigerant: R404A & R23 Weight: 680 kg Important Information for Your Safety as Buyer: The following work is carried out on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Upon successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications are subject to change and errors excepted!) Should you have any further questions, please feel free to contact us by phone.

Betingelse: brugt, kilometerstand: 23.723 km, effekt: 205 kW (278,72 hk), første registrering: 11/2004, brændstoftype: diesel, samlet vægt: 15.000 kg, akslekonfiguration: 2 aksler, bremser: retarder, farve: rød, geartype: mekanisk, emissionsklasse: Euro 3, samlet bredde: 2.500 mm, total højde: 3.300 mm, Produktionsår: 2004, Udstyr: ABS, kompressor, Mercedes-Benz Atego 1528 med METZ DLK 23-12 L32 CAN Automotive drejestige, klar til øjeblikkelig indsats!----1. registrering: 11/2004 Kilometerstand: 23.723 km Driftstimer: 1.333,00 timer 20-års hovedeftersyn netop udført Standardvognens udstyr: * 6-trins manuel gearkasse * Telligent bremsesystem * Fjedertype: blad/blad * Akselafstand: 4760 mm * Tilladt totalvægt: 15 t * Flad brændstoftank 130 l * Pneumatisk justerbart rat * Ståltagluge * Motorbremse med konstantspjæld * Akseludveksling i = 5,85 * Differentialespærre på bagaksel * S-førerhus forlænget 180 mm * Prismeret førersæde fra ISRI * Justerbart passagersæde fra ISRI * Mellem-/ekstra sæde med sikkerhedssele * ABS (Anti-Blocking System) * ASR (Antriebs-Schlupfregelung, traction control) * Armlæn på begge døre * Ekstra tågeforlygter * Driftstidstæller * Hastighedsbegrænser 100 km/t * Stabilistator for- og bagaksel * Nakkestøtter til fører og begge passagerer * Elektrisk justerbart sidespejl venstre * Wide-angle spejl og fortovsspejl højre * El-ruder begge sider * 4-hjuls parkeringsbremse * Slyngekæder på bagaksel * Skivebremser for og bag * Forstærkede batterier (2 x nye) * Dæk 285/70 R 19,5 Goodyear, næsten nye, 13 mm mønster * Bak-kamera med ekstra skærm * 2 x reservehjul Udstyr på drejestigen: * Overbygning: Metz drejestige DLK 23-12 L32 CAN med redningskurv (redningshøjde ca. 30,75 m), maks. opstigningsvinkel 75 grader, maks. kurvlast 270 kg, nominiel redningshøjde 23 m, nominiel udlægning 12 m, støtteben horisontalt/vertikalt, støttebredde variabel 2.400-4.500 mm * Særligt lyssystem * Frontblink * Original Martinshorn * Bårerum til DIN-båre inkl. tilpasning til skoopkurv, belastbar indtil 150 kg * Drejelig strålerør * Fast installeret strømforsyning til redningskurv, 2 Schuko-stik i kurven Dkjdpfx Aox Txkhofush * Fast vandledning i øverste del af stigen med ventil og B-Storz koblinger, slangetilslutning * 1 højt udstyrsrum bag førerhus * 3 sikringspunkter i redningskurven til fastgørelse af besætning * Løfteøje på stigens nederste del, belastbar op til 4000 kg * LED belysning rundt om køretøjet på understellet * Platform på drejeskive til DIN-generator * 2 justerbare projektører på enden af stigens nedre del, betjenes fra hovedkontrollen * Fuld dokumentation med servicehæfte; alle eftersyn årligt overholdt Følgende arbejder udføres inden levering: - Syn og partikelfilterkontrol (HU/AU og SP) ny - Ny serviceeftersyn og olieservice - 20-års inspektion på stigeopbygning inklusive udskiftning af hydraulikslanger og hydraulikolie-filter, gældende til 05/2034 - Sikkerhedseftersyn i henhold til GUV-G 9102 ved levering/overdragelse ----Køretøj klar til brug, velholdt både indvendig og udvendig! Ikke-ryger køretøj! Kontaktperson for dette køretøj: ---- Daniel Seidler Tlf: Mobil: også WhatsApp Email: Forbehold for ændringer, mellemsalg og fejl!

Betingelse: meget god (brugt), Mettler Toledo Type: TGA/DSC 1 STAR® Description For sale is a METTLER TOLEDO TGA/DSC 1 STAR® system, a high-quality and precise laboratory instrument for thermal analysis of materials. The device combines thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) in one unit, making it ideal for industrial, research, material testing, and quality assurance applications. Functions & Areas of Application - Thermogravimetric analysis (mass changes) - DSC analysis (heat flow, melting points, Tg) - Analysis of plastics, polymers, chemicals, pharmaceutical and engineering materials - Measurements dependent on temperature and time - High precision and stability - Network and PC connectivity (STAR® system) Technical Data (approx.) Dimensions: approx. 500 × 500 × 600 mm Manufacturer: METTLER TOLEDO Model: TGA/DSC 1 STAR® Sensor type: SDTA FRS2 Power supply: 100–240 V / 50–60 Hz Power consumption: approx. 300–600 W Weight: approx. 35–45 kg Important Note: "The table shown in the photos is not included in the sale." Condition: used Dkjdex H R Urspfx Afujh Scope of delivery: (see photo) (Specifications and details subject to change and error!) For further questions, please feel free to contact us by phone.

Produktionsår: 2018, Betingelse: klar til brug (brugt), Generelle data Mål bredde: 592 mm Mål dybde: 1054 mm Mål højde: 952 mm Maskinvægt: 125 kg Styring Mærke: CNC MarEcon styresystem Dodjx Imrvjpfx Afujkh Denne optiske målemaskine er fremstillet i 2018. MAHR MahrShaft SCOPE 250 plus er udstyret med et højopløseligt CMOS-matrixkamera, integreret 21" touchskærm og CNC MarEcon styresystem. Maskinen understøtter en målelængde på 250 mm og kan håndtere emner op til 100 mm i diameter og 5 kg i vægt. Hvis du søger en målemaskine med høj præcision, er MAHR MahrShaft SCOPE 250 plus et oplagt valg. Kontakt os for yderligere information. Anvendelsesområder Måling

Betingelse: brugt, Produktionsår: 2001, Lippert Belt Conveyor Inclined Conveyor with Curve and Straight Section GF 6150-650-500 RA1440 The Lippert conveyor belt dates from 2001 and is in good (used) condition. The belt conveyor is equipped with a SEW brand motor featuring a MOVIMOT frequency inverter for speed control. Side guides and/or light barriers can be installed on request for an additional charge. Support legs are not included in the scope of delivery but are optionally available upon request. The displayed images of the conveyor system were taken while it was still installed in a logistics center. Technical Data: - Conveyor length (NL): 6150 mm (inclined section 2310 mm + upper straight section 3840 mm) - Frame width (NB): 650 mm - Belt width (GuB): 500 mm - Build height (BH): 105 mm - Support feet: optionally available - Conveyor speed (v m/s): adjustable upwards and downwards with frequency inverter - Drive: SEW gear motor S37 DT80N4/MM07/BW1 - Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 - Return roller (UR): Ø = 34 mm - Drive drum (AT): Ø = 81 mm - Belt: Type HSL 8 E - Year of construction: 2001 - Incline / decline: adjustable Optionally available: - Support legs - Side guide (single or double sided) Prices net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional consulting, please do not hesitate to contact us. Feel free to reach us by phone or email. Dsdpfx Aok Abawefuskh We are happy to support you in planning and implementing your projects. We look forward to hearing from you. Best regards, Your Team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics