CentrumdrejebænkWeiler
Primus Tischdrehmaschine
Centrumdrejebænk
Weiler
Primus Tischdrehmaschine
VB plus moms
12.500 €
Stand
Brugt
(fuldt funktionsdygtig)
Beliggenhed
Ubstadt-Weiher 

Oplysninger om maskinen
- Maskinbetegnelse:
- Centrumdrejebænk
- Producent:
- Weiler
- Model:
- Primus Tischdrehmaschine
- Stand:
- meget god (brugt)
- Funktionalitet:
- fuldt funktionsdygtig
Pris og placering
VB plus moms
12.500 €
- Beliggenhed:
- Großer Sand 19-21, 76698 Ubstadt-Weiher, Deutschland

Ring op
Detaljer om tilbuddet
- Annonce-ID:
- A18829986
- Opdatering:
- sidst den 28.03.2025
Beskrivelse
Weiler Primus Lead and Feed Screw Bench Lathe – Excellent Condition!
Technical Specifications:
>> Machine No. 2801
>> Centre height: 120 mm
>> Distance between centres: 430 mm
>> Spindle speed: 60 - 3000 rpm in 18 gear steps
>> Spindle bore: 23 mm
>> Short-taper spindle nose DIN 55027
>> Tailstock taper: MT 2
>> Feeds from 0.03 to 0.15 mm/rev
>> Thread cutting: metric, imperial, module, and diametral pitch possible
>> Metric thread pitches from 0.25 to 2.5 mm
>> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m
Accessories and Equipment:
>> 1 pc Röhm 3-jaw chuck 125 mm with 4 sets of jaws
Lhjdpev Tyzcjfx Ah Tjh
>> Collet chuck with collets from 2 mm to 12 mm (in 1 mm increments) with draw tube
>> Multifix size A with 4 toolholders
>> Change gears
>> Fixed steady
>> Faceplate
>> Spindle guard
>> Clamping tools
About the machine:
For sale is a Weiler Primus lead and feed screw bench lathe in very good condition. The machine is, of course, fully functional. All carriage movements are very smooth and consistent. The Weiler also runs quietly at high speeds. This Primus comes from a government facility where it saw little use. This newer generation of Weiler lathes is extremely user-friendly and can produce surfaces comparable to grinding. Take advantage of the opportunity to inspect the machine under power on site and verify its condition for yourself. (The base cabinet is included but is not bolted to the machine).
Digital readout available at extra cost.
Annoncen er blevet oversat automatisk. Oversættelsesfejl kan forekomme.
Technical Specifications:
>> Machine No. 2801
>> Centre height: 120 mm
>> Distance between centres: 430 mm
>> Spindle speed: 60 - 3000 rpm in 18 gear steps
>> Spindle bore: 23 mm
>> Short-taper spindle nose DIN 55027
>> Tailstock taper: MT 2
>> Feeds from 0.03 to 0.15 mm/rev
>> Thread cutting: metric, imperial, module, and diametral pitch possible
>> Metric thread pitches from 0.25 to 2.5 mm
>> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m
Accessories and Equipment:
>> 1 pc Röhm 3-jaw chuck 125 mm with 4 sets of jaws
Lhjdpev Tyzcjfx Ah Tjh
>> Collet chuck with collets from 2 mm to 12 mm (in 1 mm increments) with draw tube
>> Multifix size A with 4 toolholders
>> Change gears
>> Fixed steady
>> Faceplate
>> Spindle guard
>> Clamping tools
About the machine:
For sale is a Weiler Primus lead and feed screw bench lathe in very good condition. The machine is, of course, fully functional. All carriage movements are very smooth and consistent. The Weiler also runs quietly at high speeds. This Primus comes from a government facility where it saw little use. This newer generation of Weiler lathes is extremely user-friendly and can produce surfaces comparable to grinding. Take advantage of the opportunity to inspect the machine under power on site and verify its condition for yourself. (The base cabinet is included but is not bolted to the machine).
Digital readout available at extra cost.
Annoncen er blevet oversat automatisk. Oversættelsesfejl kan forekomme.
Send anmodning
Telefon & Fax
+49 7251 ... annoncer
Du kan også være interesseret i disse annoncer.
Annoncer
Mierlo
594 km
Inverter-drejebænk
RogiWF250V-Fx750
RogiWF250V-Fx750
Annoncer
Soerendonk
610 km
Drejebænk
NHH
NHH
Annoncer
Prüm
706 km
Traktor
ClaasArion 610 Hexashift Stage V CIS
ClaasArion 610 Hexashift Stage V CIS
Annoncer
Aurillac
1.356 km
Traktor
ClaasAxos 310
ClaasAxos 310
Annoncer
Velen
516 km
Delingshoved
HBMTeiltisch 200
HBMTeiltisch 200
Annoncer
Deitingen
1.015 km
Præcision drejebænk
Schaublin102-80
Schaublin102-80
Annoncer
Sokołów Podlaski
929 km
Universal drejebænk TYTAN 750 PREMIUM
Metal Technics PolskaMTP TYTAN 750 PREMIUM 0,75kW/230V
Metal Technics PolskaMTP TYTAN 750 PREMIUM 0,75kW/230V
Annoncer
Aach
939 km
CNC drejebænk
GILDEMEISTERNEF 320 K
GILDEMEISTERNEF 320 K
Annoncer
Uttendorf
934 km
Fræsemaskine
EMCOFB 3
EMCOFB 3
Annoncer
Wald
927 km
Værktøjsfræser Fræsemaskine
DeckelFP 1
DeckelFP 1
Din annonce er blevet slettet
Der opstod en fejl













































































































